How To Replace Overall (Dungaree) Buckles/Fastener Clips - Step-by-Step Guide!
Although the metal buckles/fastener clips on our denim overalls are made from high-quality materials, they may still break at certain point due to wear and tear. If this happens, don't panic! Simply let us know via email (firstname.lastname@example.org) and we'll send you a pair of replacement buckles for free!
Then, there comes the question "how to replace the old metal buckles with the new ones?" So here is a step-by-step guide on just that!
Step 1: Lay the garment flat with its front facing you.
Step 2: Loosen the upper loop to make room for the lower loop to go through.
Step 3: Let the lower loop come through, and remove the old buckle from the belt.
Step 4: Put on the new buckle, and make sure the head of the buckle is on top of the belt.
Step 5: Loosen the belt at the fastener to make room.
Step 6: Let the tip of the belt go through from the outer side, and make sure it goes far enough to make a loop.
Step 7: Let the tip of the belt go thought from the inner side.
Step 8: Pull the tip of the belt so that the lower loop is straightened completely.
Step 9: Straighten the upper loop by pulling either from the left or from the right.
Step 10: Snap the buckle on and we are good to go!🌻